doc. no : qw0905- rev. : date : data sheet lvy2041/trs-x ligitek electronics co.,ltd. property of ligitek only lvy2041/trs-x 21 - dec - 2004 a tape and reel type led lamps
note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. lvy2041 25.0min 2.54typ 1.0min ?? 0.5 typ 5.2 4.2 1.5max 3.0 4.0 t package dimensions l h1 h2 lvy2041/trs-x part no. p2 w3 w1 d p p1 f w0 w2 g h page 1/5 ligitek electronics co.,ltd. property of ligitek only
note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. absolute maximum ratings at ta=25 j i fp pd i f tstg t opr tsol esd symbol typical electrical & optical characteristics (ta=25 j ) power dissipation reverse current @5v electrostatic discharge storage temperature soldering temperature operating temperature parameter peak forward current duty 1/10@10khz forward current part no. 75 -40 ~ +100 max 260 j for 5 sec max (2mm from body) -40 ~ +85 ir 2000 10 ratings vy 60 30 mw j v j g a ma ma unit ligitek electronics co.,ltd. property of ligitek only page 2/5 30 viewing angle 2 c 1/2 (deg) min. 300 20 min. 1.7 forward voltage @ ma(v) max. 2.6 dominant wave length f dnm 590 spectral halfwidth ??f nm 20 typ. luminous intensity @20ma(mcd) 450 emitted yellow part no lvy2041/trs-x material algainp lens color yellow transparent lvy2041/trs-x
20.0 trs-9 19.0 0.75 0.79 description maxmum minimum quantity/reel 2000pcs 1.13 hub recess inside diameter 28.6 d2 iside reel flange thickness overall reel thickness arbor hole diameter t2 t1 1.18 30.0 d3 0.54 13.8 reel diameter core diameter 3.08 d 78.2 d1 1.37 34.9 inch mm 3.46 88.0 d 2.25 57.2 1.97 50.0 1.5 38.1 t1 t2 d3 14.96 380 4.02 102 inch mm marking d2 d1 specification dimensions symbol information ?e symbol adhesive tape position remark:trs=tape and reel straight leads tape width adhesive t ape width ------- ------- ------- package dimensions ?e 0.57 0 0.69 w3 17.5 w2 w1 0 14.5 19.0 0.75 4.0 15.5 0.16 0.61 center of component location overall taped pack age thickness feed hole location lead location ------- ------- ------- ------- feed hole to overall com ponent height lead length after com ponent height feed hole pitch ------- ------- trs-10 ------- 0.17 0.2 ------- 0.33 w0 t 8.5 ------- p2 p1 5.1 4.4 9.75 1.42 0.38 0.06 7.7 5.8 0.3 0.23 ------- 0.72 0.49 p l 12.4 w0 h2 18.0 ------- 13.0 11.0 0.51 0.43 19.4 36 0.76 1.42 part no. lvy2041/trs-x page 3/5 trs-4 feed hole to bottom of com ponent trs-7 trs-8 trs-5 trs-6 front-to-rear deflection trs-3 trs-2 trs-1 ------- 27.5 28.5 1.08 1.12 0.78 0.89 0.96 0.94 24.0 24.5 h1 22.5 19.9 25.0 0.98 25.5 1.0 23.5 20.9 0.93 0.82 ------- 0.69 0.85 1.0 25.5 21.5 ? h 17.5 ------- 26.5 22.5 1.04 0.89 18.5 2.0 0.73 0.08 option code symbol items component lead pitch tape feed hole diameter ------- ------- dimensions symbol information ?e minimum symbol maximum inch 0.15 0.09 f d 2.3 3.8 mm 3.0 4.2 0.12 0.17 mm inch specifications ligitek electronics co.,ltd. property of ligitek only
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 0.0 0.5 1.0 1.5 2.0 2.5 3.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 typical electro-optical characteristics curve vy chip part no. page4/5 lvy2041/trs-x -60 x 100% 50% 100% 75% 25% 25% 0 50% 75% -60 x -30 x 0 x 30 x fig.6 directivity radiation
this test intended to see soldering well performed or not. the purpose of this test is the resistance of the device under tropical for hous. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solderability test 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec high temperature high humidity test thermal shock test solder resistance test the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. operating life test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) high temperature storage test low temperature storage test the purpose of this is the resistance of the device which is laid under ondition of hogh temperature for hours. 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) reliability test: test item test condition description mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard ligitek electronics co.,ltd. property of ligitek only 5/5 page part no. lvy2041/trs-x
|
